Why did my laptop battery stop charging?

Before you can fix your laptop that doesn’t cost the user, you should be aware of why it was malfunctioning initially. Computers need hundreds of components to function properly and when something isn’t working, you’ll be left to figure out why. There is a myriad of possible causes for the laptop battery shedding its charge, we’ve honed the most common causes into three main factors: issues with power cords or software problems, as well as decreasing battery health. Get to Know more about why is my laptop plugged in not charging hp.

Power cord problems

Moving your laptop from one place to another requires taking your laptop charger with you. Between wrapping it in a way to make it easy to pack and setting it down in bizarre ways to make room for a remote outlet, your cord could be bent to the point of bending from the beginning.

The key components work in tandem to provide power to your laptop. A majority of PC chargers feature a two-in-one AC adapter. One piece connects to your wall, and the other connects directly to the computer. If both are properly connected and the charging light on your PC does not illuminate, you could be experiencing a malfunction cable or damaged one.

Software error

Windows 10 has proven to be among the most independent operating systems that has ever been use on PCs. It is able to recognize whenever internal issues arise, and also trigger important updates to make sure that all of your software is kept up to current. However, it could be unable to spot certain things.

It’s possible that your computer’s have  set to close down at a low degree, or go into sleep mode following minutes of idleness. While these settings don’t constitute “malfunctions,” per say however, they could appear as.

Software issues can arise when the drivers on your computer wear out. An old driver could cause your computer to stop accepting the AC adapter’s electricity. Reinstalling the driver for your battery is a simple and quick solution to this issue.

Battery health is declining

As with every other technology laptop batteries won’t last for ever. One of the main causes for laptop batteries to quit charging is decreasing health. In the same way that an older laptop computer is having a tough time keeping charges the battery of an old laptop is no different.

Prior to the battery failure Did you notice that your laptop was beginning to:

  • Do you overheat when charging?
  • Lose charge quickly?
  • Do you take longer to fully be charge?

If yes, then each of these problems are certain ire indications that your battery may be becoming old. Unsure about the condition of your battery? Click here to access our step-by step guide for running an battery report on Windows 10.

How do repair a laptop that doesn’t charge?

It’s time to solve the issue in the hands of your computer. With these suggestions, you might be able save yourself an excursion into a shop repair, or an email to the manufacturer of your PC.

1. Verify that you’re connected

It might sound silly however, it’s important to verify that your charger and laptop have actuallyplugged into. It’s impossible to charge the laptop if it is not connected from a source of power and therefore, you must check that everything is hooked to the correct way.

Take a look at every contact point starting from the outlet, all the way to the AC adapter, and the adapter to the laptop port. The plugs should be securely connected with no movement. Make sure to look at the bottom the laptop in order to ensure sure that the battery is in the frame of your PC.

You’ll need to confirm that the issue isn’t with an outlet in itself. Fuses that are blowing out are not uncommon so make sure you try an alternative outlet or replace the surge protector after verifying that the contact points are in good condition.

2. Make sure you’re using a valid port.

The modern computer is changing faster than they have ever been. The advent of USB-C ports is an essential one that is now a part of the majority of modern laptop computers. These ports that are ultra-thin are ideal for ultra-thin laptops, however those who are new to the port might be confused about the multi-purpose capabilities of these ports.

Computers with two USB-C ports will likely come with specific functionality names that you aren’t aware of. The general rule is that one USB-C port can be used to charge devices, while the second is for data-transfer. If your laptop’s charger is connected to the port for data transfer instead of that of charging, there is no charging will take place.

Make sure that your cords are in their appropriate locations before you blame the hardware.

3. Unplug the battery

If your laptop has a an external battery, you can take these steps:

Step 1. Unbolts or screws and remove the battery

Step 2. Press the power button for 10 to 15 minutes

Step 3. Connect the charger to the wall outlet.

Step 4. Power the PC on

If your laptop is able to turn on without any issue it is safe to assume that it’s not your charging device and instead, a damaged battery that’s giving the PC problems. To confirm this assumption it is possible to reinstall the battery, and then boot back up.

Should your notebook not have batteries that can be remover it is possible consult a specialist who can access your laptop and perform diagnostic tests.

4. Check your power cords for any signs of breakage or unusual bends

Power cords are small lightweight, thin, and highly sensitive PC tools that might be the reason that your laptop isn’t charging even when it’s plugs in. Take a look at your power cords taking a look all the way along the cord for unusual bends breakages, warping, or stretching that could suggest physical damage.

If you find that your cord have bent by the gnawing of a pet or even a powerful cleaning machine, replacing damages end of the power cord is going to be the easiest solution.

5. Update your drivers

In some cases  all that your system requires is a quick restart of driver updates and it will be brought back to the health it was in. Take these actions to make sure you update the drivers on your Windows 10 laptop’s battery drivers.

Step 1. Right-click the Start menu in order to launch the Quick Access menu and choose Device Manager.

Step 2. For Batteries Open the drop-down menu, then right-click Microsoft ACPI Compliant Control Method Battery

Step 3. Within the new window for selection you can press the Update Driver button.

Windows will ask “How do you intend to find driver?” and you’ll have the option of letting Windows search for drivers automatically or manually search your PC to find the right software. Once you’ve updated your driver, restart your computer and attempt charging once more.

Article related: What Are Content Writing Services?



Related Articles

Back to top button