The Rockspace signal booster is a multimode device that can operate as an access point. The compatible device runs easily with a WiFi 5 router. A robust booster delivers a throughput of around 750 MBps. You will get a coverage of around 1292 square feet if installed in the correct location. The two exterior antennas broads the range. The performance-rich device boosts its coverage even by penetrating through the thick concrete walls. Therefore, it gives stability and reliability to your internet connection. It bears upto 25 users connecting in real-time without any buffering. It comes with the best USA-based security protocol that ensures your connection is secure and virus-free.
To get better speed, you can attach the ethernet wire to gigabit ports with a 4K TV, gaming consoles, router, etc. It is manufactured to speed up the existing coverage of the router. Instead of the repeater, it also operates as an access point. The setup is super easy with the WPS button. It may take less than a minute. The smart signal indicator allows finding the best spot. Now we’re gonna tell you the operation to do the web interface setup of the Rockspace wireless signal booster.
Rockspace Signal Booster Web Interface Setup
The web interface setup of the Rockspace wireless signal booster is simple. Assure that you had a mobile phone or PC with internet connectivity. Make sure that you have a WiFi router to extend the coverage. You need to spot the location where you wanna install it. Position your booster at that location. Affirm your router is close to the booster. Now attach the booster straight to the AC joint and turn it on. You will observe the PWR LED light illuminating frequently. Now, open the WiFi settings of your PC or mobile and see the network name with rockspace_EXT. Click on it to connect. Note that mobile data is off if you are using a smartphone. After the successful connection with the network, the setup page reveals itself. If not, then type 192.168.10.1 wifi repeater setup in the explore section of your browser.
Extend the Network
On the passphrase section, type the passphrase. Keep in mind that the passphrase you type is for the Rockspace management rather than the extended network. The page with the wifi network available reveals your interface. Look for the network you wish to extend and click it.
If you can’t find your network, click rescan. Next, type the network passphrase and click extend. You can customize the extended network SSID. It remains the same as the extended network. That’s it, the booster has been successfully connected to the router. Now it’s time to reposition the booster for a better internet experience.
Reposition your Rockspace Signal Booster
Unplug the booster from the AC joint and move it to the new spot. The new spot will be halfway between your PC or mobile and router. Try to locate in a spot with a feeble range. Next, attach the booster to the AC socket. If you didn’t have the AC socket there, it is suggested to make a new one. Remain quiet until you observe a blue light. If not, then position your booster close to the router or vice-versa. Use a mobile phone or PC to detect the network at various spots. If you find the network, then connect to it. The passphrase would be the same for the extended network as you have with the router network. After successfully connecting to the booster signal, type the domain name re.rockspace.local in the explore box to login.
Reset The Rockspace Signal Booster
Resetting the repeater will swap all the customized settings to a default one. To do it, plug the signal booster into the AC joint first. Remain until you see the blue PWR LED light. Look for the reset hole. It is on the bottom side. Using the sharp object, push it into the reset hole for approximately eight to twelve seconds. The booster will restart by itself. It means the repeater has been reset successfully.
Conclusion
Here we discussed all the technical specifications as well as features of the Rockspace repeater. Steps by step setup guide with a web interface are also mentioned in full detail. It will tell you to connect with the existing network and extend it. If you still face any issues, understand the reset operation that we have discussed briefly.
